Product
Location:Home > Product > Wtule®Ceramic Series
Scan QR code
WTULE 301 is a two-component penetrating primer composed of epoxy resin and corresponding curing agent.
Use of the product:
It is suitable for matching primer of micro-Tu Le series products, and can also be used for reinforcement and reinforcement of concrete structures.
Product advantages:
Excellent permeability;
Strong adhesion;
It has consolidation effect on base material;
Excellent water resistance;
Convenient construction.
Product performance:
Drying time (25 ℃) | Surface drying: < 4 hours, hard drying: < 24 hours (related to ambient temperature) |
Recoating interval time | 4-6 hours (related to ambient temperature) |
Adhesion (pull-away method) | ≥5Mpa |
Mixed service time | 2 hours (25 ℃) |
Construction conditions:
The base surface must be flat, free from cracking and hollowing, floating slurry, oil pollution and obvious accumulated water; Construction is prohibited when the working face does not meet the requirements, and construction shall be carried out on the concrete foundation surface of the original structure as far as possible.
Construction is prohibited in rainy days, typhoon days and when the temperature is lower than 5 ℃.
Key points of construction:
Acceptance of base surface, polishing and removing float layer, repairing base surface defects, cleaning and cleaning;
After mixing and stirring evenly, brush coating or spraying shall be adopted, paying attention to uniformity, no leakage of coating and no sagging;
Before the coating film is completely cured, it should be isolated and protected. It is forbidden to trample and pile up heavy objects and sharp objects.
Storage and transportation:
This product should be stored in a ventilated, dry and cool place, and professional hazardous chemicals vehicles should be transported for long-distance transportation.
· Shelf life:
12 months
Packaging specifications:
20kg/set
Health and safety:
Wear protective equipment during construction to avoid skin contact, splashing into eyes and eating by mistake.
This product technology is imported from abroad and produced domestically. The product is carried out according to European and Chinese national standards, and must be used according to the requirements of packaging or product specifications. Materials must be used after small test to confirm that there is no quality problem. If there is any quality problem, please contact our company in time.
Statement:
The company's products are all qualified products, but due to the different actual use environment and methods of products, our company cannot be responsible for the construction quality. Please do sample tests before the materials enter the site and use them after passing the test.
Previous : WTULE302 ceramic bisphenol ammonia floor paint
Next:Last