WTULE302 is a two-component semi-light acrylic polyurethane topcoat, using imported aliphatic isocyanate curing agent, the paint film has good light and color retention and wear resistance.

Use of the product:

It is suitable for outdoor packaging floors, and can also be used for renovation of concrete, asphalt or steel structure substrates.

Product advantages:

Strong light and color preservation;

The paint film is tough, wear-resistant and has strong adhesion;

Easy to clean;

Possess excellent anti-skid performance;

Manual painting, convenient construction;

Product performance:

Construction conditions:

The base surface must be solid and flat, without cracking and hollowing, floating slurry, oil pollution and damp water; When the working face does not meet the requirements, it is forbidden to construct, and try to construct on the concrete base surface of the original structure;

Construction is prohibited when the temperature is lower than 5 ℃ in rainy days and typhoon days;

The moisture content of base surface is less than 10%, the air humidity is less than 80%, and the base surface temperature is higher than the dew point temperature by more than 3 ℃.

Key points of construction:

Acceptance of base surface, polishing and removing float layer, repairing base surface defects, cleaning and cleaning;

After painting primer and background paint, depict 3D painting;

Mix and stir the transparent overlay coating, and evenly brush the transparent overlay on the base surface of 3D painting to enhance the three-dimensional sense of the coating;

Before the coating film is completely cured, it should be isolated and protected. It is forbidden to trample and pile up heavy objects and sharp objects.

Storage and transportation:

This product should be stored in a ventilated, dry and cool place, and professional hazardous chemicals vehicles should be transported for long-distance transportation.

· Shelf life:

12 months

Packaging specifications:

20Kg/set

Health and safety:

Wear protective equipment during construction to avoid skin contact, splashing into eyes and eating by mistake.

This product technology is imported from abroad and produced domestically. The product is carried out according to European and Chinese national standards, and must be used according to the requirements of packaging or product specifications. Materials must be used after small test to confirm that there is no quality problem. If there is any quality problem, please contact our company in time.